China Industrial Nylon Gear Conveyor and Excavator Drive Tooth Plastic Wheel Chain Sprocket with Good quality

Product Description

Product Description

What is the Details of our Chain Sprocket?

Product Name

Chain sprocket

Material

 PTFE,Nylon,POM,PP,PU,UHMWPE,HDPE,PET,PEEK

Color

 Nature,Black,White,Blue,Green,etc;

Diameter

5-500mm,or customized

Free sample

 Available

Shape

 According to drawing

Condition

 Make to order

Used

 Widely

Gears are a crucial part of many motors and machines.

Gears help increase torque output by providing gear reduction and they adjust the direction of rotation like the shaft to the rear wheels of automotive vehicles. Here are some basic types of gears and how they are different from each other.

Plastic Gear VS Metal Gear

Plastic is inexpensive, corrosion resistant, quiet operationally and can overcome missing teeth or misalignment. Although plastic is weaker than metal, it has the advantages of self-lubrication, light weight and low noise that metal lacks. Acetal, delrin, nylon, and polycarbonate plastics are common.

 

Detailed Photos

* Lower cost:

Generally, plastic gears are less expensive to produce than metal gears. As there is usually no need for secondary finishing, plastic gears typically represent a 50% to 90% saving relative to stamped or machined metal gears, according to Plastics Technology.

 

 

* Design freedom:

Moulding plastic offers more efficient gear geometries than metal. Moulding is ideal for creating shapes, such
as internal gears, cluster gears, and worm gears, where the cost for forming them in metal can be prohibitive.

* Reduced noise:

The superior noise-dampening properties of plastics result in a quiet running gear. This has made plastics essential for the high-precision tooth shapes and lubricious or flexible materials required in the ongoing quest for quieter drives.

 

 

 

* Lubrication:

The inherent lubricity of many plastics makes them ideal for computer printers, toys, and other low-load situations that require dry gears. Plastics can also be lubricated by grease or oil.

* Corrosion-resistant:

Unlike metal gears, plastic gears are immune to corrosion. Their relative inertness means they can be used
in water meters, chemical plant controls and other situations that would cause metal gears to corrode or degrade.

* Good shock absorption:

Plastic gears are more forgiving than metal because plastic can deflect to absorb impact loads. It also does a better job of distributing localised loads caused by misalignment and tooth errors.

Our advantages:

1)We are a manufacturer integrating industry and trade.

2)We foceus on processing plastic products for more than10 years.

3)Flexible delivery,Super quality,Factory price.

4)OEM Service: customize color,size,material.

5)MOQ:1pc.

 

Processing equipment:

CNC machinery center,engraving machine,Cnc lathe and other equipment processing services.
 

Processing materials:

PTFE,POM,Nylon,UHMWPE,PEEK,HDPE,PU,PTE.ect
 

Commitment:

if the parts cannot be used because of the processing problems,we will be responsible for free repair or reprocessing,and bear the round-trip freight.

Production Process

Technological process:

Step.01:Raw material preparation

Step.02: Audit and design drawings

Step.03: Processing products

Step.04: Quality inspection

Step.05:Repair product burr and inventory

Step.06:Packing

Service process:

Step.01:The format of the drawing can be identified

Step.02: Response quotation and  delivery time.

Step.03: Confirm the information and pay the order.

Step.04: Complete the order and wait for delivey.

 

Drawing format:

2D:JPG,  PDF,  DWG,  DXF,  EXB

3D:SLDPRT,PRT,  CATPART STP,  STEP,  IGS,  X_T

Application Areas

 

 

Packaging & Shipping

Packing Details : Inner plastic bag,outside carton box,last is the pallet,all are based on the customers’ requirments
Delivery Details : 10-30 days after you confirm the samples
Payment terms: Payment=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us.

FAQ

1. Q: Are you trading company or manufacturer ?
A: We are manufacturer.

2. Q: How long is your delivery time?
A: According to the difficulty and quantity of product processing,a reasonable arrival time will be given to you.
Usually 2-5 days for CNC machine processing parts. It will take around 2-4 weeks for mold making.

3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

4. Q: Can you do assembly and customized package for us?
A: We have an assembly factory and can assemble all kinds of plastic, metal and electronic parts for you. For the finished
products,we can customized the retail package and you can sell it directly after receiving them.

Standard Or Nonstandard: Nonstandard
Application: Motor, Electric Cars, Machinery, Marine, Toy, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Bevel Wheel
Material: Nylon

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Product Name

Chain sprocket

Material

 PTFE,Nylon,POM,PP,PU,UHMWPE,HDPE,PET,PEEK

Color

 Nature,Black,White,Blue,Green,etc;

Diameter

5-500mm,or customized

Free sample

 Available

Shape

 According to drawing

Condition

 Make to order

Used

 Widely
Standard Or Nonstandard: Nonstandard
Application: Motor, Electric Cars, Machinery, Marine, Toy, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Bevel Wheel
Material: Nylon

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Product Name

Chain sprocket

Material

 PTFE,Nylon,POM,PP,PU,UHMWPE,HDPE,PET,PEEK

Color

 Nature,Black,White,Blue,Green,etc;

Diameter

5-500mm,or customized

Free sample

 Available

Shape

 According to drawing

Condition

 Make to order

Used

 Widely

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.
sprocket

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
sprocket

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
sprocket

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China Industrial Nylon Gear Conveyor and Excavator Drive Tooth Plastic Wheel Chain Sprocket     with Good quality China Industrial Nylon Gear Conveyor and Excavator Drive Tooth Plastic Wheel Chain Sprocket     with Good quality
editor by CX2023-03-29

Tags: chain | chain and conveyor | Chain And Drive | chain and gear drive | chain and sprocket | chain conveyor | chain conveyor chain | chain conveyor conveyor | chain conveyor drive chain | chain conveyor sprocket | chain drive | Chain Drive Conveyor | chain drive gear | chain drive sprocket | chain gear | chain plastic sprocket | chain sprocket | chain sprocket conveyor | chain wheel sprocket | china chain | china chain conveyor | china conveyor chain | china sprocket | conveyor chain | Conveyor Chain And Sprocket | Conveyor Chain Drive | conveyor chain plastic | conveyor chain sprocket | Conveyor Drive Chain | conveyor plastic chain | conveyor sprocket | drive chain | drive conveyor chain | drive gear | drive sprocket | drive sprocket wheel | excavator drive sprocket | excavator gear | excavator sprocket | GEAR | gear and chain | gear chain | gear drive | gear drive chain | gear sprocket | gear wheel | good chain | industrial chain | industrial chain conveyor | industrial chain drive | industrial chain sprocket | industrial conveyor chain | Industrial Drive Chain | industrial gear | industrial sprocket | nylon drive sprocket | nylon gear | nylon sprocket | plastic chain conveyor | plastic chain drive | plastic chain sprocket | plastic conveyor chain | Plastic Drive Chain | plastic gear | plastic sprocket wheel | Sprocket | sprocket and chain | sprocket chain wheel | sprocket conveyor chain | sprocket gear | sprocket wheel | sprocket with chain | tooth chain conveyor | tooth gear | wheel and sprocket | wheel gear | wheel sprocket | wheel with sprocket